Powermax65 SYNC plasma cutter

The Powermax65 SYNC® is a next-generation professional grade air plasma cutter that dramatically simplifies system operation for cutting and gouging up to 20 mm (3/4″). Featuring automated system process set-up via advanced RFID-enabled SmartSYNC® torches and a revolutionary single-piece cartridge consumable that provides trackable utilization data. The Powermax65 SYNC maximizes productivity through reductions in downtime, optimized cut quality performance and streamlined consumable inventory management.

get_quote_button.png

Specifications

General specifications

Input voltages

200–480 V, 1-PH, 50/60 Hz

200–600 V, 3-PH, 50/60 Hz

Kilowatt output

9 kW

Input current

200/208/240/480 V,

1-PH 52/50/44/22 A @ 9 kW

200/208/240/480/600 V,

3-PH 32/31/27/13/13 A @ 9 kW

Output current

20–65 A

Rated output voltage

139 VDC

Duty cycle @ 104° F

50% @ 65 A, 230–600 V, 1/3-PH

40% @ 65 A, 200–208 V, 1/3-PH

100% @ 46 A, 230–600 V, 1/3-PH

Open circuit voltage (OCV)

295 VDC

Dimensions with handles

483 mm D; 233 mm W; 430 mm H (19″ D; 9.2″ W; 17″ H)

Weight w/7.6 m (25′) torch

29 kg (61 lbs.)

Gas supply

Clean, dry, oil-free air or nitrogen

Optimum inlet gas pressure

7.6–8.3 bar (110–120 psi)

Minimum inlet gas pressure

5.2 bar (75 psi)

Recommended inlet gas flow rate

Cutting: 210 I/min @ 5.9 bar (450 scfh, 7.5 scfm @ 85 psi)

Gouging: 210 I/min @ 4.8 bar (450 scfh, 7.5 scfm @ 70 psi)

Input power cable length

3 m (10′)

Power supply type

Inverter – IGBT

Engine drive requirement

15 kW for full 65 A output

Certifications

CSA-certified for use in the Americas and Asia, except China

Warranty

Power supplies have a 3-year warranty and torches a 1-year warranty

Operating data

CapacityThicknessCut speed
Recommended 20 mm (3/4″) 500 mm/min (20 ipm)
  25 mm (1″) 250 mm/min (10 ipm)
Severance (hand cutting) 32 mm (1-1/4″) 125 mm/min (5 ipm)
Pierce* 16 mm (5/8″)  

*Pierce rating for handheld cutting, or mechanized cutting with programmable torch height control.

 

Maximum removal gouging

CapacityMetal removal rateGroove profile
Typical gouge 4.0 kg (8.8 lbs.) per hour 2.9 mm D x 6.4 mm W (0.11″ D x 0.25″ W)